Automatic transmissions have gotten more sophisticated in recent years for Bellevue car owners. Take the number of gears for starters: The base is four speeds, five is very common. Many manufacturers are using six speeds and several have seven or even eight speeds. As you can imagine, this means more parts in your car’s transmission.
Today’s transmissions are computer controlled. Some high end transmissions have two or three computers. Our experienced technicians at Yeck’s Auto Repair in Bellevue receive ongoing training on transmission service and repair.
Bellevue, Omaha, and Papillion car owners trust that transmissions are engineered to last. But Nebraska motorists need to understand that they are also engineered to tighter tolerances. If a portion of the transmission is starved for lubrication, it can lead to failure.
This can happen with not enough fluid. And, if the transmission fluid gets dirty or sludgy, small passages in the transmission can get clogged, then the lubricant is blocked and can’t get to all the parts to protect them, so they wear out prematurely.
Most newer vehicles in Bellevue, Omaha, and Papillion require special transmission fluids – at Yeck’s Tire & Auto Repair we can make sure you get the type your manufacturer recommends.
As you can imagine, repairing one of these new transmissions can be quite costly at most Omaha auto repair shops. That’s why manufacturers have a schedule for how often Bellevue drivers should change the fluid and what type of fluid to use.
Simple Answers from Yeck's Tire & Auto in Bellevue: Transmission Service
My friend just had a very expensive transmission repair in Omaha. How can Bellevue drivers like myself avoid transmission trouble?
Yeck's Tire & Auto Answer:
Next to your engine, your transmission is the most important component in your vehicle – so you and your fellow Bellevue drivers want to do all you can to avoid transmission repairs.
Bellevue drivers may have noticed a trend of engines becoming more and more powerful in recent years. At the same time, fuel economy has been improving in nearly every motor vehicle segment in NE. More power and better economy have always been at odds. Some of the improvement in fuel economy has been due to engine design, but most of the increases can be credited to advances in transmission technology.
Every engine has a sweet spot in which it most efficiently makes power. This is often referred to by Bellevue technicians as the power band – the optimal engine speed (measured in revolutions per minute, or RPM). The computers that control what gear your automatic transmission is in also try to keep it in the right gear in order to maintain optimal engine speed – whatever your Bellevue driving conditions may be. Modern automatic transmissions have anywhere between four and ten speeds. The more “speeds” your transmission has, the more time your engine can operate at peak efficiency. Needless to say, transmissions have become more sophisticated.
Transmissions are cooled and lubricated by transmission fluid. This pressurized fluid is directed through small passages to effect gear changes. When transmission fluid gets old and contaminated, the small passages can become plugged, which adversely affects shifts. The dirty fluid circulating in the transmission can eat away at gaskets and seals causing internal leaks that also hurt shifting. This is why some recommend that transmissions be serviced from time to time. The interval varies by vehicle, so check your owner's manual or with your friendly and knowledgeable Yeck's Tire & Auto service advisor about your transmission service recommendations.
Old, contaminated fluid is removed and new fluid is installed. Keeping up with the manufacturer's recommended service schedule helps prevent internal damage that may result in a transmission rebuild. Let Yeck's Tire & Auto help you extend the life of your vehicle and prevent repairs with recommended preventive maintenance service.